Transition state
The highest-energy arrangement on the way from reactants to products. Also called the activated complex.
Unit 6: Reaction Rates and Kinetics, lesson 6
Every reaction has an energy hill to climb. The height of that hill, the activation energy, decides how many collisions succeed, and it explains why a small rise in temperature can speed a reaction up so much.
Three quick questions on ideas this lesson uses. They are not scored.
1.A reaction releases heat to its surroundings. It is …
Exothermic reactions release energy. Their ΔH is negative.
2.What must be true of a collision for it to cause a reaction?
An effective collision needs at least the activation energy and the right orientation.
3.The sign of ΔH for an endothermic reaction is …
Endothermic reactions absorb energy, so the products have more energy than the reactants and ΔH is positive.
When two molecules collide and react, old bonds stretch and break while new bonds begin to form. Partway through, the atoms are in an awkward, high-energy arrangement. Getting to that arrangement takes energy, even if the reaction releases energy in the end.
A reaction-progress diagram shows this. Energy is on the vertical axis. The horizontal axis follows the reaction from start to finish.[OpenStax Chemistry 12.5]
A reaction-progress diagram. Energy is on the vertical axis and reaction progress on the horizontal axis. The line starts level at the reactants, rises over a single hill and comes down to the products, which are lower than the reactants. The top of the hill is labeled transition state. An arrow from the reactant level up to the top of the hill is labeled E A, the activation energy.
Three things to find on the diagram:
A collision with less energy than Ea cannot reach the top, so the particles slide back and stay as reactants.
Key idea
The activation energy is the energy difference between the reactants and the transition state. It is always positive.
The diagram shows a second energy, the enthalpy change of the reaction, ΔH. It is the difference between the products and the reactants, and it ignores the hill completely.
Exothermic: products end lower than reactants, so ΔH is negative. Energy is released overall.
Exothermic: products end lower than reactants, so ΔH is negative. Energy is released overall.Endothermic: products end higher than reactants, so ΔH is positive. Energy is absorbed overall.A reaction-progress diagram for an exothermic reaction. The products are lower in energy than the reactants. The activation energy arrow runs from the reactants up to the top of the hill. The delta H arrow points down from the reactant level to the product level. Exothermic: products end lower than reactants, so ΔH is negative. Energy is released overall.
A reaction-progress diagram for an endothermic reaction. The products are higher in energy than the reactants. The activation energy arrow runs from the reactants up to the top of the hill. The delta H arrow points up from the reactant level to the product level. Endothermic: products end higher than reactants, so ΔH is positive. Energy is absorbed overall.
ΔH tells you how much energy the reaction releases or absorbs overall. Ea tells you how fast it goes. One does not predict the other. A reaction can release a great deal of energy and still be very slow, because its hill is high. Paper burning in air is like that. It does not start until a match gets some molecules over the hill.
Read the same diagram from right to left and you have the reverse reaction. It goes over the same hill, but it starts from the product side.
The exothermic diagram again, with a second arrow. One arrow, E A, runs from the reactants up to the top of the hill. A longer arrow, E A reverse, runs from the products up to the top of the hill. The gap between the reactant and product levels is delta H.
For an exothermic reaction, the products sit lower than the reactants, so the climb back is taller. The two activation energies differ by exactly ΔH.
Ea (reverse) = Ea (forward) − ΔH
Try it: read a diagram
On a reaction-progress diagram the reactants are at 50 kJ/mol, the transition state is at 120 kJ/mol and the products are at 20 kJ/mol.
At any temperature, the molecules in a sample do not all have the same energy. A few are slow, most are in the middle, and a few are very fast. A graph of how many molecules have each energy is called a Maxwell–Boltzmann distribution.[OpenStax Chemistry 12.5]
Only molecules with at least the activation energy can react when they collide. On the graph, those are the molecules to the right of Ea. Switch the temperature and the activation energy and watch the shaded area.
About 2.9 percent of the molecules in this model have at least the activation energy (the shaded area).
About 2.9 percent of the molecules in this model have at least the activation energy (the shaded area).About 17 percent of the molecules in this model have at least the activation energy (the shaded area).About 13 percent of the molecules in this model have at least the activation energy (the shaded area).About 37 percent of the molecules in this model have at least the activation energy (the shaded area).A curve of number of molecules against kinetic energy at the cooler temperature. The curve rises quickly to a peak at low energy and then tails off toward high energy. A dashed vertical line marks a high activation energy. The area under the curve to the right of that line is shaded: about 2.9 percent of the molecules. About 2.9 percent of the molecules in this model have at least the activation energy (the shaded area).
A curve of number of molecules against kinetic energy at the cooler temperature. The curve rises quickly to a peak at low energy and then tails off toward high energy. A dashed vertical line marks a low activation energy. The area under the curve to the right of that line is shaded: about 17 percent of the molecules. About 17 percent of the molecules in this model have at least the activation energy (the shaded area).
A curve of number of molecules against kinetic energy at the hotter temperature. The curve rises quickly to a peak at low energy and then tails off toward high energy. Compared with the cooler curve, the peak is lower and further right, and the tail is higher. A dashed vertical line marks a high activation energy. The area under the curve to the right of that line is shaded: about 13 percent of the molecules. About 13 percent of the molecules in this model have at least the activation energy (the shaded area).
A curve of number of molecules against kinetic energy at the hotter temperature. The curve rises quickly to a peak at low energy and then tails off toward high energy. Compared with the cooler curve, the peak is lower and further right, and the tail is higher. A dashed vertical line marks a low activation energy. The area under the curve to the right of that line is shaded: about 37 percent of the molecules. About 37 percent of the molecules in this model have at least the activation energy (the shaded area).
Raising the temperature stretches the curve to the right. The peak moves only a little, but the tail grows a lot. The shaded share can double or triple for a modest change in temperature.
Two curves of number of molecules against kinetic energy. The cooler curve has a tall peak at low energy. The hotter curve has a lower peak, further to the right, and a longer tail. A dashed line marks the activation energy. To the right of it, the area under the hotter curve is several times larger than the area under the cooler curve.
This is the main reason heat speeds reactions up. Temperature does not change the activation energy. It changes how many molecules can get over it.
Key idea
A higher temperature does not lower the hill. It gives a much larger fraction of molecules enough energy to climb it.
Now switch between the high and low activation energy at one temperature. With a lower Ea, the dashed line moves left and much more of the curve is shaded.
So at the same temperature and the same concentrations:
In the rate law, all of this is hidden inside the rate constant. A higher temperature or a lower activation energy gives a larger k.
The highest-energy arrangement on the way from reactants to products. Also called the activated complex.
Reactants up to the transition state. A larger Ea means a slower reaction.
Products minus reactants. Negative for exothermic, positive for endothermic. It does not set the rate.
Ea (reverse) = Ea (forward) − ΔH.
A higher temperature gives a larger fraction of molecules at least Ea. The hill itself does not change.
0 of 9 solved
Check each answer as you go. If you get stuck, open the hint first, then the text solution.
Use the diagram. Energies are in kJ/mol. What is the activation energy of the forward reaction, in kJ/mol?
A reaction-progress diagram. The reactants are at an energy of 30, the top of the hill is at 90 and the products are at 10.
Measure from the reactants up to the top of the hill.
For the same diagram (energies in kJ/mol), what is ΔH for the forward reaction, in kJ/mol? Include the sign.
A reaction-progress diagram. The reactants are at an energy of 30, the top of the hill is at 90 and the products are at 10.
Products minus reactants.
For the same diagram (energies in kJ/mol), what is the activation energy of the reverse reaction, in kJ/mol?
A reaction-progress diagram. The reactants are at an energy of 30, the top of the hill is at 90 and the products are at 10.
The reverse reaction starts at the products and climbs to the same top.
Is the reaction in this diagram exothermic or endothermic?
A reaction-progress diagram with one hill. The products finish at a higher energy than the reactants.
Compare where the line starts and where it ends.
A reaction has Ea = 85 kJ/mol and ΔH = +30 kJ/mol. What is the activation energy of the reverse reaction, in kJ/mol?
Ea (reverse) = Ea (forward) − ΔH.
The graph shows the distribution of molecular energies for one sample at two temperatures, with Ea marked. Why is the reaction faster at the higher temperature?
Two curves of number of molecules against kinetic energy. The cooler curve has a tall peak at low energy. The hotter curve has a lower peak, further to the right, and a longer tail. A dashed line marks the activation energy. To the right of it, the area under the hotter curve is several times larger than the area under the cooler curve.
Compare the areas to the right of the dashed line.
Reaction X has Ea = 40 kJ/mol and reaction Y has Ea = 90 kJ/mol. At the same temperature and concentrations, which is faster?
Which hill is easier to climb?
Which change increases the rate constant, k, of a reaction?
k is fixed for one reaction at one temperature.
A reaction is strongly exothermic but extremely slow at room temperature. What does this tell you?
Which energy sets the rate?
Sections read: 0%. Practice: 0 answered.