Rate
The change in concentration divided by the change in time. Usual unit: M/s.
Unit 6: Reaction Rates and Kinetics, lesson 1
Some reactions are over in a flash and some take years. Kinetics is the study of how fast. It starts with one measurement, which is how quickly a concentration changes.
Three quick questions on ideas this lesson uses. They are not scored.
1.What does a concentration of 0.50 M mean?
M stands for molarity: moles of solute per liter of solution.
2.A line on a graph passes through the points (0, 10) and (5, 0). What is its slope?
Slope is rise over run: (0 − 10) ÷ (5 − 0) = −2.
3.In the reaction 2 H2 + O2 → 2 H2O, how many moles of H2 react with 3 moles of O2?
The coefficients give 2 mol H2 for every 1 mol O2, so 3 mol O2 needs 6 mol H2.
A speed tells you how far a car travels in each hour. A reaction rate tells you how much a concentration changes in each second.
rate = change in concentration ÷ change in time
Concentration is measured in molarity, M, which is moles per liter. Time is usually in seconds. So the usual unit of rate is molar per second, written M/s.
Chemists write the concentration of a substance by putting its formula in square brackets. [A] means “the concentration of A”. The Greek letter delta, Δ, means “the change in”. So Δ[A] is the change in the concentration of A, and Δt is the change in time.[OpenStax Chemistry 12.1]
Suppose a substance A breaks down into products, and you measure its concentration every 20 seconds.
| Time (s) | [A] (M) |
|---|---|
| 0 | 1.00 |
| 20 | 0.71 |
| 40 | 0.50 |
| 60 | 0.35 |
| 80 | 0.25 |
To find the average rate between two times, take the change in concentration and divide by the change in time. Always subtract in the same order: later minus earlier.
In the first 20 seconds, [A] goes from 1.00 M to 0.71 M. The change is 0.71 − 1.00 = −0.29 M. The change is negative because A is being used up.
Δ[A]/Δt = −0.29 M ÷ 20 s = −0.0145 M/s
A rate is always reported as a positive number. So for a reactant, put a minus sign in front to cancel the negative change.
rate of disappearance of A = −Δ[A]/Δt = 0.0145 M/s
Key idea
For a reactant, rate = −Δ[A]/Δt. For a product, rate = +Δ[B]/Δt. Either way the rate comes out positive.
Try it: an average rate from the table
Use the table above.
Compare the two answers. In the first 20 seconds the rate was 0.0145 M/s. Between 40 and 60 seconds it was 0.0075 M/s, about half as fast. Nothing about the conditions changed. The reaction slowed because there was less A left to react.
A graph shows this at a glance. The rate is the steepness of the curve.
The same curve with two straight lines drawn on it. The line joining the points at 0 and 20 seconds is steep. The line joining the points at 60 and 80 seconds is much less steep.
The curve is steepest at the start and flattens out as A runs low. Almost every reaction behaves this way.
An average rate covers a stretch of time. The rate at one moment is called the instantaneous rate. On a graph, it is the slope of the line that just touches the curve at that moment. The instantaneous rate at time zero has its own name, the initial rate. Lesson 2 uses initial rates, because at the start you know exactly what the concentrations are.
Key idea
On a graph of concentration against time, rate is slope. A steep curve means a fast reaction, and a flat curve means the reaction has nearly stopped.
Which substance you watch changes the number you get. Take a reaction in which each A that reacts makes two B.
A → 2 B
Two curves on the same axes for the reaction A gives 2 B. The curve for A falls from 1.0 molar. The curve for B rises from zero, and at every moment it is climbing twice as fast as A is falling. At 40 seconds A is 0.5 molar and B is 1.0 molar.
Every time one mole of A disappears, two moles of B appear. So B appears twice as fast as A disappears. The coefficients in the balanced equation give the ratio of the rates.
Here is a real example. Dinitrogen pentoxide breaks down like this.[OpenStax Chemistry 12.1]
2 N2O5 → 4 NO2 + O2
If N2O5 is disappearing at 0.060 M/s, how fast is each product appearing? Use the coefficients as a mole ratio, as you would in stoichiometry.
So one reaction has three different rates, depending on what you measure. To get a single number that everyone agrees on, divide each rate by that substance’s coefficient. That number is called the rate of reaction. Here it is 0.060 ÷ 2, or 0.120 ÷ 4, or 0.030 ÷ 1. All three give 0.030 M/s.
Try it: rates and coefficients
For the reaction N2 + 3 H2 → 2 NH3, hydrogen is disappearing at 0.090 M/s.
You cannot see a concentration directly. You measure something that changes along with it, at regular times.
Whatever you measure, the method is the same. Record the value against time, turn it into a concentration, and find how fast the concentration changes.
The change in concentration divided by the change in time. Usual unit: M/s.
Rates are positive. Use −Δ[A]/Δt for a reactant and +Δ[B]/Δt for a product.
On a concentration–time graph, a steeper curve is a faster reaction. Reactions slow as reactants run out.
Average: over an interval. Instantaneous: at one moment. Initial: at time zero.
Rates of different substances are in the ratio of their coefficients. Dividing by the coefficient gives one rate of reaction.
0 of 8 solved
Check each answer as you go. If you get stuck, open the hint first, then the text solution.
The concentration of a reactant X falls from 0.80 M to 0.50 M in 15 s. What is the average rate of disappearance of X, in M/s?
Change in concentration divided by change in time, reported as a positive number.
Use the table. What is the average rate of disappearance of A between 10 s and 30 s, in M/s?
| Time (s) | [A] (M) |
|---|---|
| 0 | 0.600 |
| 10 | 0.480 |
| 20 | 0.390 |
| 30 | 0.320 |
| 40 | 0.270 |
Use only the rows for 10 s and 30 s. The time interval is 20 s.
The graph shows the concentration of a reactant against time. At which marked point is the reaction fastest?
A concentration against time curve that falls steeply at first and then levels off. Three points are marked on it: P near the start where the curve is steepest, Q in the middle, and R near the end where the curve is almost flat.
Rate is the steepness of the curve.
For the reaction 2 NO2 → 2 NO + O2, NO2 disappears at 0.040 M/s. At what rate does O2 appear, in M/s?
Two NO2 are used for every one O2 made.
For the reaction 4 NH3 + 5 O2 → 4 NO + 6 H2O, ammonia disappears at 0.20 M/s. Give the rate for each substance, in M/s.
(a) Disappearance of O2
(b) Appearance of H2O
Multiply by the coefficient you want, divided by the coefficient you have.
For 2 N2O5 → 4 NO2 + O2, NO2 appears at 0.080 M/s. What is the rate of reaction, in M/s?
The rate of reaction is any substance's rate divided by its own coefficient.
Why does the rate of most reactions decrease as time passes?
Think about what is changing in the flask.
A product P forms in a reaction. Use the table. What is the average rate of appearance of P over the first 50 s, in M/s?
| Time (s) | [P] (M) |
|---|---|
| 0 | 0.000 |
| 25 | 0.090 |
| 50 | 0.150 |
| 75 | 0.190 |
For a product the change is positive, so no minus sign is needed.
Sections read: 0%. Practice: 0 answered.