AP ChemistryAll courses

Unit 6: Reaction Rates and Kinetics, lesson 10

The rate-determining step and the rate law

In a mechanism, one step is usually much slower than the rest. That slow step controls the rate of the whole reaction, and it explains where the rate law comes from.

  • About 20 minutes
  • 5 sections
  • 9 practice questions
  • Narrated

After this lesson you can

  • Explain why the slowest step sets the overall rate.
  • Write the rate law predicted by a mechanism whose first step is slow.
  • Decide whether a proposed mechanism agrees with an experimental rate law.
  • Find the slow step on a reaction-progress diagram.
  • Write the rate law for a mechanism with a fast step before the slow step.

Warm-up check

Three quick questions on ideas this lesson uses. They are not scored.

  1. 1.What is the rate law for the elementary step A + B → C?

    Question 1: choose one
    See the answer

    For an elementary step, each reactant's coefficient is its order: rate = k[A][B].

  2. 2.A species that is made in one step and used up in a later step is …

    Question 2: choose one
    See the answer

    Made then used up: an intermediate. Used then made again: a catalyst.

  3. 3.At the same temperature, the step with the larger activation energy is …

    Question 3: choose one
    See the answer

    A higher hill means fewer collisions succeed, so the step is slower.

The slow step sets the pace

Picture a school lunch line with three stations. Picking up a tray takes two seconds. Paying takes two seconds. But the station in the middle, where food is served, takes thirty seconds. No matter how fast the other two are, students leave the line only as fast as food is served.

Mechanisms work the same way. If one elementary step is much slower than the others, the overall reaction can go no faster than that step. It is called the rate-determining step, or the rate-limiting step.[OpenStax Chemistry 12.6]

Key idea

The rate of the overall reaction equals the rate of its slowest step, the rate-determining step.

When the first step is slow

This gives a way to predict a rate law from a mechanism. Take the reaction of nitrogen dioxide with carbon monoxide from lesson 9.[OpenStax Chemistry 12.6]

  1. Step 1NO2 + NO2 → NO3 + NOslow
  2. Step 2NO3 + CO → NO2 + CO2fast

OverallNO2 + CO → NO + CO2

The first step is the slow one.

The overall rate equals the rate of step 1. Step 1 is an elementary step, so its rate law comes straight from its equation. Two NO2 molecules collide.

rate = k[NO2]2

That is exactly the rate law found by experiment for this reaction. Notice what is missing. Carbon monoxide is a reactant, but it is not in the rate law. The mechanism explains why. CO does not take part until step 2, and step 2 is fast. Adding more CO makes a fast step faster, which does not help. The reaction is zero order in CO.

So the rule for a slow first step is simple: the rate law of the overall reaction is the rate law of step 1.

Try it: a slow first step

Overall: 2 A + B → C. Step 1 (slow): A + B → D. Step 2 (fast): D + A → C.

Rate law predicted by this mechanism
Overall order
D is
Show the reasoning
  • Rate law predicted by this mechanism: rate = k[A][B]. The slow step is A + B → D, so rate = k[A][B].
  • Overall order: 2. 1 + 1 = 2
  • D is: an intermediate. Made in step 1 and used up in step 2.

Testing a proposed mechanism

Lesson 9 gave two tests for a mechanism. Now you can do both.

  1. Add the steps. They must give the overall reaction.
  2. Write the rate law from the slow step. It must match the rate law found by experiment.

Suppose someone proposed instead that NO2 and CO react in a single step, NO2 + CO → NO + CO2. The steps add up, since there is only one. But that step would give rate = k[NO2][CO]. Experiment says rate = k[NO2]2. The one-step mechanism fails the second test, so it is wrong.

The slow step on an energy diagram

The slow step is the one with the largest activation energy. On a reaction-progress diagram, measure each hill from the valley just before it to its top. The biggest climb is the rate-determining step.

Slow step
Reaction-progress diagramA reaction-progress diagram with two hills. The first hill is tall: the climb from the reactants to its top is large. The second hill is small: the climb from the intermediate valley to its top is short. Step 1 has the larger activation energy, so it is the slow step.Reaction progressEnergyreactantsproductsstep 1step 2intermediate

Step 1 has the bigger climb, so it is the rate-determining step.

Two different two-step reactions. Compare the climb for each step.
Describe this figure

A reaction-progress diagram with two hills. The first hill is tall: the climb from the reactants to its top is large. The second hill is small: the climb from the intermediate valley to its top is short. Step 1 has the larger activation energy, so it is the slow step. Step 1 has the bigger climb, so it is the rate-determining step.

A reaction-progress diagram with two hills. The first hill is small. The second hill is tall: the climb from the intermediate valley to its top is large. Step 2 has the larger activation energy, so it is the slow step. Step 2 has the bigger climb, so it is the rate-determining step.

A fast step before the slow step

Sometimes the slow step is not the first one. This case is harder, and it shows up in the most demanding AP questions.

Here is a mechanism proposed for the reaction 2 NO + Cl2 → 2 NOCl.[OpenStax Chemistry 12.6]

  1. Step 1NO + Cl2 ⇌ NOCl2fast
  2. Step 2NOCl2 + NO → 2 NOClslow

Overall2 NO + Cl2 → 2 NOCl

A fast step that goes both ways, followed by a slow step.

The slow step gives rate = k2[NOCl2][NO]. But NOCl2 is an intermediate. A rate law may only contain substances you can measure and control, so an intermediate has to be replaced.

Replacing an intermediate in a rate law

  1. Step 1. Write the rate law of the slow step. rate = k2[NOCl2][NO]

  2. Step 2. Use the fast step. Step 1 is fast and goes both ways, so it reaches equilibrium. At equilibrium its forward rate equals its reverse rate: k1[NO][Cl2] = k₋1[NOCl2].

  3. Step 3. Solve for the intermediate. [NOCl2] = (k1/k₋1)[NO][Cl2]

  4. Step 4. Put that into the slow-step rate law. rate = k2(k1/k₋1)[NO][Cl2][NO]

  5. Step 5. Tidy up. The constants combine into one k, and the two [NO] terms combine. The result is rate = k[NO]2[Cl2].

There is a shortcut that gives the same answer. Count every reactant that is used up to and including the slow step. Here that is one NO and one Cl2 in step 1, and one more NO in step 2. So the rate law is rate = k[NO]2[Cl2].

Key concepts

Rate-determining step

The slowest step in a mechanism. The overall rate equals its rate.

Slow first step

The overall rate law is the rate law of step 1. Reactants that enter later are zero order.

Testing a mechanism

The steps must add up to the overall reaction, and the slow step must give the experimental rate law.

Energy diagram

The slow step has the largest activation energy: the biggest climb from a valley to the next top.

Fast step first

Replace the intermediate using the fast equilibrium. No intermediate may be left in the final rate law.

Practice

0 of 9 solved

Check each answer as you go. If you get stuck, open the hint first, then the text solution.

  1. Q1conceptOpen

    Why does the slowest step of a mechanism determine the overall rate?

    Question 1: choose one
    Hint

    Think of the slowest station in a line.

    Text solution
    1. Products can only form as fast as the slowest step lets material through.
    2. Faster steps before or after it have to wait for it.
    3. So the overall rate equals the rate of the slow step.
  2. Q2slow firstOpen

    Overall: 2 NO2 + F2 → 2 NO2F. Step 1 (slow): NO2 + F2 → NO2F + F. Step 2 (fast): F + NO2 → NO2F. What rate law does this mechanism predict?

    Question 2: choose one
    Hint

    The first step is slow. Write its rate law from its equation.

    Text solution
    1. The overall rate equals the rate of step 1.
    2. Step 1 is NO2 + F2 → NO2F + F.
    3. rate = k[NO2][F2].
  3. Q3intermediateOpen

    In the mechanism above (Step 1: NO2 + F2 → NO2F + F. Step 2: F + NO2 → NO2F), which species is the intermediate?

    Question 3: choose one
    Hint

    Which species is made in step 1 and used up in step 2?

    Text solution
    1. F is a product of step 1 and a reactant in step 2.
    2. It is not in the overall equation.
    3. F is the intermediate.
  4. Q4testingOpen

    The reaction A + 2 B → C has the experimental rate law rate = k[B]2. Which mechanism agrees with it?

    Question 4: choose one
    Hint

    Write the rate law of each slow step and compare with rate = k[B]2.

    Text solution
    1. The first mechanism predicts rate = k[A][B].
    2. The second predicts rate = k[B]2, and its steps add up to A + 2 B → C.
    3. The single step predicts rate = k[A][B]2.
  5. Q5zero orderOpen

    A reaction X + Y → Z is zero order in Y. What does this suggest about the mechanism?

    Question 5: choose one
    Hint

    If Y were in the slow step, its concentration would matter.

    Text solution
    1. Zero order means changing [Y] does not change the rate.
    2. So Y cannot be in the slow step or in a step before it.
    3. Y takes part in a fast step after the slow one.
  6. Q6diagramOpen

    Which step in this diagram is the rate-determining step?

    Reaction-progress diagramA reaction-progress diagram with three hills labeled step 1, step 2 and step 3. The climb to the top of the second hill, measured from the valley before it, is the largest of the three.Reaction progressEnergyreactantsproductsstep 1step 2step 3307052100406212
    Describe this figure

    A reaction-progress diagram with three hills labeled step 1, step 2 and step 3. The climb to the top of the second hill, measured from the valley before it, is the largest of the three.

    Question 6: choose one
    Hint

    Measure each climb from the valley before it.

    Text solution
    1. Step 1 climbs from 30 to 70. Step 2 climbs from 52 to 100. Step 3 climbs from 40 to 62.
    2. Step 2 has the largest activation energy.
    3. Step 2 is the rate-determining step.
  7. Q7fast first, harderOpen

    Overall: 2 NO + O2 → 2 NO2. Step 1 (fast, both ways): NO + NO ⇌ N2O2. Step 2 (slow): N2O2 + O2 → 2 NO2. What rate law does this mechanism predict?

    Question 7: choose one
    Hint

    Start with the slow step, then replace the intermediate N2O2 using the fast step.

    Text solution
    1. Slow step: rate = k2[N2O2][O2].
    2. From the fast equilibrium, [N2O2] = (k1/k₋1)[NO]2.
    3. Put it in: rate = k[NO]2[O2].
  8. Q8fast firstOpen

    A student writes the rate law rate = k[N2O2][O2] as a final answer for the mechanism above. What is wrong with it?

    Question 8: choose one
    Hint

    Can you set the concentration of N2O2 when you mix the reactants?

    Text solution
    1. N2O2 is an intermediate. It is not something you add to the flask.
    2. A final rate law should contain only reactants, and sometimes a catalyst.
    3. The intermediate has to be replaced using the fast step.
  9. Q9predictOpen

    For the mechanism with rate = k[NO]2[O2], the concentration of NO is doubled and the concentration of O2 is doubled. By what factor does the rate increase?

    Hint

    Second order in NO and first order in O2.

    Text solution
    1. Doubling [NO] multiplies the rate by 22 = 4.
    2. Doubling [O2] multiplies the rate by 2.
    3. 4 × 2 = 8.

Sources

  • OpenStax Chemistry 12.6. Flowers, P.; Theopold, K.; Langley, R.; Robinson, W. R. Chemistry 2e, section 12.6, Reaction Mechanisms. OpenStax, 2019. https://openstax.org/books/chemistry-2e/pages/12-6-reaction-mechanisms

How did it go?

Sections read: 0%. Practice: 0 answered.

How was this lesson?