Integrated rate law
An equation for concentration against time. The three are on the AP equation sheet.
Unit 6: Reaction Rates and Kinetics, lesson 3
A rate law tells you how fast a reaction goes at one moment. An integrated rate law tells you how much reactant is left at any time, and it gives a second way to find the order, from a graph.
Three quick questions on ideas this lesson uses. They are not scored.
1.In the straight-line equation y = mx + b, which letter is the slope?
m is the slope and b is the value of y where the line crosses the y axis.
2.A reaction has the rate law rate = k[A]2. What is the order in A?
The exponent on [A] is 2, so the reaction is second order in A.
3.Use a calculator. What is ln(0.50), to two decimal places?
ln(0.50) = −0.693, which rounds to −0.69.
The rate law from lesson 2 connects rate to concentration. In the lab, though, you usually measure concentration against time. You want an equation that connects those two directly.
Calculus turns each rate law into that kind of equation. The result is called an integrated rate law. You do not need to do the calculus. The three results are on the AP equation sheet, and this lesson shows how to use them.[OpenStax Chemistry 12.4]
All three are for a reaction with one reactant, A → products. In each, [A]0 is the concentration at the start and [A] is the concentration at time t.
Concentration of A against time for three reactions that all start at 1.0 molar. The zero order reaction falls along a straight line. The first order and second order reactions fall along curves that flatten out, and the second order curve flattens the most.
Zero order, rate = k. The concentration falls by the same amount every second.
[A] = −kt + [A]0
First order, rate = k[A]. Here the natural log of the concentration falls steadily.
ln[A] = −kt + ln[A]0
Second order, rate = k[A]2. Here one over the concentration rises steadily.
1/[A] = kt + 1/[A]0
Look at the shape they share. Each one has the form y = mx + b, the equation of a straight line, with time as x.
Key idea
Each integrated rate law is a straight line when you plot the right thing against time: [A] for zero order, ln[A] for first order, 1/[A] for second order.
This gives a way to find the order from one experiment. Measure [A] at several times. Then make three graphs from the same data: [A] against time, ln[A] against time, and 1/[A] against time. Only one of them will be a straight line, and that one names the order.
Switch between the three orders below and watch which graph is straight.
Zero order: [A] against time is the straight line. Its slope is −k.
Zero order: [A] against time is the straight line. Its slope is −k.First order: ln[A] against time is the straight line. Its slope is −k.Second order: 1/[A] against time is the straight line. Its slope is +k.Three graphs of the same data for a zero order reaction: the concentration of A, the natural log of the concentration of A, and one over the concentration of A, each against time. Only the graph of the concentration of A is a straight line. The other two are curves. Zero order: [A] against time is the straight line. Its slope is −k.
Three graphs of the same data for a first order reaction: the concentration of A, the natural log of the concentration of A, and one over the concentration of A, each against time. Only the graph of the natural log of the concentration of A is a straight line. The other two are curves. First order: ln[A] against time is the straight line. Its slope is −k.
Three graphs of the same data for a second order reaction: the concentration of A, the natural log of the concentration of A, and one over the concentration of A, each against time. Only the graph of the one over the concentration of A is a straight line. The other two are curves. Second order: 1/[A] against time is the straight line. Its slope is +k.
The slope of the straight line gives the rate constant. For zero and first order the line slopes down, and the slope is −k. For second order the line slopes up, and the slope is +k.
| Order | Straight-line plot | Slope | Units of k |
|---|---|---|---|
| Zero | [A] against t | −k | M s−1 |
| First | ln[A] against t | −k | s−1 |
| Second | 1/[A] against t | +k | M−1 s−1 |
Try it: which graph is straight
First order reactions are the most common on the AP exam. Here is a full example. A reaction A → products is first order with k = 0.030 s−1, and it starts with [A]0 = 0.80 M.
Step 1. Write the equation. ln[A] = −kt + ln[A]0
Step 2. Put in the numbers. ln[A] = −(0.030 s−1)(40 s) + ln(0.80)
Step 3. Work out each term. The first term is −1.20. On a calculator, ln(0.80) is −0.223. So ln[A] = −1.20 + (−0.223) = −1.423.
Step 4. Undo the natural log. Raise e to the power −1.423 on a calculator. That gives [A] = 0.24 M.
Step 5. Check that it makes sense. The answer is less than 0.80 M and greater than zero, as it should be.
The same equation gives a time. How long until [A] falls to 0.20 M? Rearrange to get t alone.
t = (ln[A]0 − ln[A]) ÷ k = (ln 0.80 − ln 0.20) ÷ 0.030 s−1 = 46 s
The other two equations work the same way, and they need no logs.
A zero order reaction has k = 0.0050 M/s and starts at 0.60 M. After 50 s:
[A] = −(0.0050 M/s)(50 s) + 0.60 M = 0.35 M
A second order reaction has k = 0.20 M−1 s−1 and starts at 0.50 M. After 30 s:
1/[A] = (0.20 M−1 s−1)(30 s) + 1/(0.50 M) = 8.0 M−1, so [A] = 0.125 M
For second order, remember the last step. The equation gives 1/[A], so take the reciprocal to get [A].
An equation for concentration against time. The three are on the AP equation sheet.
[A] = −kt + [A]0. A plot of [A] against time is straight, with slope −k.
ln[A] = −kt + ln[A]0. A plot of ln[A] against time is straight, with slope −k.
1/[A] = kt + 1/[A]0. A plot of 1/[A] against time is straight, with slope +k.
Plot the data all three ways. The straight line names the order, and its slope gives k.
0 of 9 solved
Check each answer as you go. If you get stuck, open the hint first, then the text solution.
For a reaction A → products, a graph of [A] against time is a straight line that slopes downward. What is the order in A?
Which integrated rate law has [A] itself as y?
The graph of ln[A] against time for a reaction is shown. The line passes through ln[A] = −0.22 at 0 s and −2.22 at 100 s. What is k, in s−1?
The natural log of the concentration of A against time for the same experiment. The points lie on a straight line.
Find the slope from the two points. For this plot, slope = −k.
For a reaction, the graph of 1/[A] against time is the straight line shown. Which rate law fits?
One over the concentration of A against time for the same experiment. The points lie on a straight line.
Match the straight plot to its order.
A first order reaction has k = 0.010 s−1 and [A]0 = 1.00 M. What is [A] after 100 s, in M?
ln[A] = −kt + ln[A]0, and ln(1.00) = 0.
A first order reaction has k = 0.050 s−1. How long does it take for [A] to fall from 0.60 M to 0.15 M, in seconds?
t = (ln[A]0 − ln[A]) ÷ k.
A zero order reaction has k = 0.0040 M/s and [A]0 = 0.50 M. What is [A] after 75 s, in M?
[A] = −kt + [A]0.
A second order reaction has k = 0.50 M−1 s−1 and [A]0 = 0.40 M. What is [A] after 15 s, in M?
1/[A] = kt + 1/[A]0. Remember to take the reciprocal at the end.
A student calculates ln[A] and 1/[A] from the data. Which quantity changes by the same amount every 10 s, and what is the order?
| Time (s) | [A] (M) | ln[A] | 1/[A] (M−1) |
|---|---|---|---|
| 0 | 0.500 | −0.69 | 2.0 |
| 10 | 0.333 | −1.10 | 3.0 |
| 20 | 0.250 | −1.39 | 4.0 |
| 30 | 0.200 | −1.61 | 5.0 |
A straight line means equal steps in y for equal steps in time.
For the data in the table, what is the rate constant k, in M−1 s−1?
| Time (s) | 1/[A] (M−1) |
|---|---|
| 0 | 2.0 |
| 10 | 3.0 |
| 20 | 4.0 |
| 30 | 5.0 |
For 1/[A] against time, the slope is +k.
Sections read: 0%. Practice: 0 answered.