AP ChemistryAll courses

Unit 6: Reaction Rates and Kinetics, lesson 2

Rate laws and reaction order

Lesson 1 showed that a reaction slows as its reactants run low. A rate law says exactly how the rate depends on each concentration, and it can only be found by experiment.

  • About 20 minutes
  • 5 sections
  • 10 practice questions
  • Narrated

After this lesson you can

  • Read a rate law and name the order in each reactant and the overall order.
  • Predict how the rate changes when a concentration changes.
  • Find each order from a table of initial rates.
  • Calculate the rate constant, k, with its units.
  • Explain why a rate law cannot be read from the balanced equation.

Warm-up check

Three quick questions on ideas this lesson uses. They are not scored.

  1. 1.The concentration of a reactant falls by 0.060 M in 30 s. What is the average rate, in M/s?

    See the answer

    Rate = 0.060 M ÷ 30 s = 0.0020 M/s.

  2. 2.What is 32?

    See the answer

    32 = 3 × 3 = 9.

  3. 3.The initial rate of a reaction is the rate …

    Question 3: choose one
    See the answer

    The initial rate is the instantaneous rate at the start, when the concentrations are the ones you mixed.

What a rate law says

For a reaction between A and B, the rate law has this form.[OpenStax Chemistry 12.3]

rate = k[A]m[B]n

Each part has a name.

  • k is the rate constant. It is a fixed number for one reaction at one temperature.
  • m is the order in A. It tells you how strongly the rate depends on [A].
  • n is the order in B.
  • m + n is the overall order.

The orders are usually 0, 1 or 2. They are not the coefficients from the balanced equation. Two reactions with the same coefficients can have different orders, so the only way to find them is to measure rates.

Key idea

A rate law is found by experiment. You cannot write it by looking at the balanced equation.

What an order means

The order tells you what happens to the rate when you change one concentration and keep everything else the same.

  • Zero order. The rate does not depend on that concentration. Double [A] and the rate stays the same.
  • First order. The rate is proportional to the concentration. Double [A] and the rate doubles.
  • Second order. The rate depends on the concentration squared. Double [A] and the rate goes up by 22, which is 4 times. Triple [A] and the rate goes up 9 times.
Rate against concentration for three ordersRate against the concentration of A for three reactions. For the zero order reaction the line is flat: the rate stays at 1 whatever the concentration. For the first order reaction the line is straight and slopes up: at 1 molar the rate is 1 and at 2 molar it is 2. For the second order reaction the line curves upward: at 1 molar the rate is 1 and at 2 molar it is 4.01201234zero orderfirst ordersecond order[A] (M)rate (M/s)
Rate against [A] for a zero order, a first order and a second order reaction.
Describe this graph

Rate against the concentration of A for three reactions. For the zero order reaction the line is flat: the rate stays at 1 whatever the concentration. For the first order reaction the line is straight and slopes up: at 1 molar the rate is 1 and at 2 molar it is 2. For the second order reaction the line curves upward: at 1 molar the rate is 1 and at 2 molar it is 4.

Try it: what the order predicts

A reaction has the rate law rate = k[X]2[Y].

Order in X
Overall order
Rate change when [Y] is tripled
Rate change when [X] is halved
Show the reasoning
  • Order in X: 2. The exponent on [X] is 2.
  • Overall order: 3. Add the exponents: 2 + 1 = 3.
  • Rate change when [Y] is tripled: 3 times faster. First order in Y: the rate changes by the same factor as [Y].
  • Rate change when [X] is halved: one quarter as fast. Second order in X: (1/2)2 = 1/4.

Finding the orders from initial rates

To find the orders, run the reaction several times. Each time, start with different concentrations and measure the initial rate. The data below are for a reaction A + B → C.

Experiment[A] (M)[B] (M)Initial rate (M/s)
10.100.102.0 × 10−3
20.200.104.0 × 10−3
30.100.208.0 × 10−3
Initial rates for A + B → C at one temperature.

Orders from a table of initial rates

  1. Step 1. Pick two experiments where only [A] changes. In experiments 1 and 2, [B] stays at 0.10 M while [A] doubles from 0.10 M to 0.20 M.

  2. Step 2. See what the rate did. The rate went from 2.0 × 10−3 to 4.0 × 10−3 M/s. It doubled. Doubling [A] doubled the rate, so the reaction is first order in A.

  3. Step 3. Pick two experiments where only [B] changes. In experiments 1 and 3, [A] stays at 0.10 M while [B] doubles.

  4. Step 4. See what the rate did. The rate went from 2.0 × 10−3 to 8.0 × 10−3 M/s. It went up 4 times. Doubling [B] made the rate 4 times as large, and 4 is 22, so the reaction is second order in B.

  5. Step 5. Write the rate law. rate = k[A][B]2. The overall order is 1 + 2 = 3.

The pattern to remember: find the factor the concentration changed by, find the factor the rate changed by, and ask what power connects them.

rate factor = (concentration factor)order

The rate constant and its units

Once you know the orders, any one experiment gives k. Rearrange the rate law and put in the numbers from experiment 1.

k = rate ÷ ([A][B]2) = (2.0 × 10−3) ÷ (0.10 × 0.102) = 2.0 M−2 s−1

The units of k are whatever makes the rate come out in M/s. They depend on the overall order, so the units of k tell you the overall order.

Overall orderExample rate lawUnits of k
0rate = kM s−1
1rate = k[A]s−1
2rate = k[A]2M−1 s−1
3rate = k[A][B]2M−2 s−1
Units of k for each overall order (time in seconds).

The rate constant does not change when concentrations change. It changes only if the temperature changes or a catalyst is added. Later lessons explain why.

Using a rate law

With the full rate law you can predict the rate for any concentrations. Suppose [A] = 0.30 M and [B] = 0.20 M in the reaction above.

rate = (2.0 M−2 s−1)(0.30 M)(0.20 M)2 = 0.024 M/s

Try it: another table

For 2 X + Y → Z: when [X] doubles with [Y] fixed, the rate goes up 4 times. When [Y] doubles with [X] fixed, the rate does not change.

Order in X
Order in Y
Rate law
Units of k
Show the reasoning
  • Order in X: 2. Doubling made the rate 4 times as large, and 4 = 22.
  • Order in Y: 0. The rate did not change, so the order is zero.
  • Rate law: rate = k[X]2. A zero order reactant is left out of the rate law.
  • Units of k: M−1 s−1. The overall order is 2.

Key concepts

Rate law

rate = k[A]m[B]n. Found only by experiment.

Order

Zero: no effect on rate. First: rate changes by the same factor. Second: rate changes by the factor squared.

Initial rates method

Compare two experiments where one concentration changes. The rate factor equals the concentration factor raised to the order.

Rate constant

Solve the rate law for k using one experiment. k is fixed at one temperature.

Units of k

Overall order 0: M s−1. Order 1: s−1. Order 2: M−1 s−1. Order 3: M−2 s−1.

Practice

0 of 10 solved

Check each answer as you go. If you get stuck, open the hint first, then the text solution.

  1. Q1orderOpen

    A reaction has the rate law rate = k[NO]2[O2]. What is the overall order?

    Question 1: choose one
    Hint

    Add the exponents.

    Text solution
    1. The order in NO is 2 and the order in O2 is 1.
    2. Overall order = 2 + 1 = 3.
  2. Q2order, predictOpen

    For rate = k[NO]2[O2], the concentration of NO is tripled while [O2] stays the same. By what factor does the rate increase?

    Hint

    The reaction is second order in NO.

    Text solution
    1. Second order means the rate changes by the factor squared.
    2. 32 = 9. The rate is 9 times as large.
  3. Q3initial ratesOpen

    Use the table for the reaction A + B → products. Give the order in each reactant.

    Experiment[A] (M)[B] (M)Initial rate (M/s)
    10.200.101.5 × 10−4
    20.400.106.0 × 10−4
    30.200.304.5 × 10−4

    (a) Order in A

    Question 3 part a: choose one

    (b) Order in B

    Question 3 part b: choose one
    Hint

    Compare experiments 1 and 2 for A, and experiments 1 and 3 for B.

    Text solution
    1. Experiments 1 and 2: [A] doubles and the rate goes up 4 times, so the order in A is 2.
    2. Experiments 1 and 3: [B] triples and the rate triples, so the order in B is 1.
    3. The rate law is rate = k[A]2[B].
  4. Q4rate constantOpen

    For the same data, the rate law is rate = k[A]2[B]. Use experiment 1 to find the value of k. (Its units are M−2 s−1.)

    Experiment[A] (M)[B] (M)Initial rate (M/s)
    10.200.101.5 × 10−4
    20.400.106.0 × 10−4
    30.200.304.5 × 10−4
    Hint

    k = rate ÷ ([A]2[B]).

    Text solution
    1. k = (1.5 × 10−4) ÷ ((0.20)2 × 0.10).
    2. (0.20)2 × 0.10 = 0.0040.
    3. k = 0.0375 M−2 s−1, which rounds to 0.038 M−2 s−1.
  5. Q5unitsOpen

    A rate constant is reported as 4.2 M−1 s−1. What is the overall order of the reaction?

    Question 5: choose one
    Hint

    The rate must come out in M/s. How many concentrations must multiply k?

    Text solution
    1. M−1 s−1 × M × M = M s−1.
    2. k must be multiplied by two concentration terms, so the overall order is 2.
  6. Q6zero orderOpen

    In a reaction, doubling the concentration of reactant Q has no effect on the rate. What is the order in Q?

    Question 6: choose one
    Hint

    2 raised to what power equals 1?

    Text solution
    1. The rate changed by a factor of 1.
    2. 20 = 1, so the order in Q is zero.
    3. Q does not appear in the rate law.
  7. Q7predictOpen

    A reaction follows rate = k[A][B] with k = 0.50 M−1 s−1. What is the rate when [A] = 0.20 M and [B] = 0.40 M, in M/s?

    Hint

    Put the numbers straight into the rate law.

    Text solution
    1. rate = (0.50)(0.20)(0.40).
    2. rate = 0.040 M/s.
  8. Q8graphOpen

    The graph shows rate against [A] for a reaction A → products. What is the order in A?

    GraphA graph of rate against the concentration of A. The line is straight, starts at the origin and slopes upward.[A] (M)rate (M/s)
    Describe this figure

    A graph of rate against the concentration of A. The line is straight, starts at the origin and slopes upward.

    Question 8: choose one
    Hint

    What kind of rate law gives a straight line through the origin?

    Text solution
    1. A straight line through the origin means the rate is proportional to [A].
    2. That is rate = k[A], a first order reaction.
    3. A flat line would be zero order and an upward curve would be second order.
  9. Q9conceptsOpen

    The reaction NO2 + CO → NO + CO2 is found by experiment to have the rate law rate = k[NO2]2. Which statement is correct?

    Question 9: choose one
    Hint

    Where do orders come from?

    Text solution
    1. Orders are measured, not read from the balanced equation.
    2. Here the measured order in NO2 is 2 and the order in CO is zero, even though both coefficients are 1.
    3. Lesson 10 shows how the mechanism explains this.
  10. Q10initial rates, harderOpen

    Use the table for X + Y → products. In experiment 4, both concentrations are different from experiment 1. What is the missing initial rate, in M/s?

    Experiment[X] (M)[Y] (M)Initial rate (M/s)
    10.100.100.0030
    20.200.100.0060
    30.100.200.0120
    40.200.20?
    Hint

    Find both orders first. Then apply both changes to the rate from experiment 1.

    Text solution
    1. Experiments 1 and 2: [X] doubles, rate doubles. First order in X.
    2. Experiments 1 and 3: [Y] doubles, rate goes up 4 times. Second order in Y.
    3. Experiment 4 doubles both: the rate is 0.0030 × 2 × 4 = 0.024 M/s.

Sources

  • OpenStax Chemistry 12.3. Flowers, P.; Theopold, K.; Langley, R.; Robinson, W. R. Chemistry 2e, section 12.3, Rate Laws. OpenStax, 2019. https://openstax.org/books/chemistry-2e/pages/12-3-rate-laws

How did it go?

Sections read: 0%. Practice: 0 answered.

How was this lesson?