AP ChemistryAll courses

Unit 7: Equilibrium and Solubility, lesson 11

The common-ion effect

A solid dissolves less in a solution that already contains one of its ions. This is Le Chatelier's principle at work on a solubility equilibrium, and it is called the common-ion effect.

  • About 15 minutes
  • 4 sections
  • 8 practice questions
  • Narrated

After this lesson you can

  • Explain the common-ion effect using Le Chatelier's principle.
  • Calculate the molar solubility of a solid in a solution that contains a common ion.
  • Compare the solubility of a solid in different solutions.
  • Explain how acid changes the solubility of a solid whose ion is a base.

Warm-up check

Three quick questions on ideas this lesson uses. They are not scored.

  1. 1.A product is added to a reaction at equilibrium. Which way does the reaction shift?

    Question 1: choose one
    See the answer

    The reaction shifts away from what is added.

  2. 2.Which is the Ksp expression for AgCl?

    Question 2: choose one
    See the answer

    The solid is left out, and each ion has a coefficient of 1.

  3. 3.What ions does a solution of NaCl contain?

    Question 3: choose one
    See the answer

    Sodium chloride is a soluble ionic compound. It separates completely into Na+ and Cl−.

An ion that is already there

Lesson 10 found that silver chloride has a molar solubility of 1.3 × 10−5 M in pure water. What if the water already holds chloride ions, because some sodium chloride was dissolved in it first?

Sodium chloride is very soluble, so it supplies plenty of Cl−. That chloride is the same ion that silver chloride produces. It is called a common ion, because it is common to both substances.[OpenStax Chemistry 15.1]

Look at the equilibrium.

AgCl(s) ⇌ Ag+(aq) + Cl−(aq)

Chloride is a product. Le Chatelier’s principle says that adding a product shifts the reaction to the left. Ions join up to make solid. So less silver chloride can stay dissolved.

Key idea

A common ion shifts a solubility equilibrium toward the solid. The solid is less soluble than it is in pure water. Ksp does not change.

How much less

An ICE table gives the number. Find the molar solubility of AgCl in 0.10 M NaCl. The only difference from lesson 10 is the initial row: the solution starts with 0.10 M Cl−.

RowAg+Cl−
Initial00.10
Change+s+s
Equilibriums0.10 + s
ICE table for AgCl dissolving in 0.10 M NaCl. Concentrations in M.

Solubility with a common ion

  1. Step 1. Put the equilibrium row into the expression. Ksp = [Ag+][Cl−] = (s)(0.10 + s)

  2. Step 2. Use the small-x shortcut. Very little AgCl dissolves, so s is tiny next to 0.10. Then 0.10 + s is just 0.10.

  3. Step 3. Solve. 1.6 × 10−10 = (s)(0.10), so s = 1.6 × 10−9 M.

  4. Step 4. Compare. In pure water the solubility was 1.3 × 10−5 M. In 0.10 M NaCl it is about 8000 times smaller.

The shortcut is very safe here. The common ion pushes the equilibrium so far toward the solid that s is always tiny next to the concentration already present.

The values of Ksp used in this lesson are measured values at 25 °C.[OpenStax Chemistry, Appendix J]

A solid with two of one ion

For calcium fluoride in 0.10 M NaF, the fluoride already present is squared in the expression. Notice that the 0.10 is not doubled. It is the concentration that is actually there.

Ksp = [Ca2+][F−]2 = (s)(0.10)2,   so s = (4.0 × 10−11) ÷ 0.010 = 4.0 × 10−9 M

In pure water the solubility was 2.2 × 10−4 M. The common ion cuts it by a factor of more than 50,000.

Try it: where does it dissolve least?

Solid AgCl is stirred into each of these.

Pure water, or 0.10 M AgNO3: where is AgCl less soluble?
Pure water, or 0.10 M NaNO3: where is AgCl less soluble?
0.10 M NaCl, or 0.50 M NaCl: where is AgCl less soluble?
Show the reasoning
  • Pure water, or 0.10 M AgNO3: where is AgCl less soluble?: 0.10 M AgNO3. AgNO3 supplies Ag+, a common ion.
  • Pure water, or 0.10 M NaNO3: where is AgCl less soluble?: about the same in both. Neither Na+ nor NO3− is in the AgCl equilibrium, so there is no common ion.
  • 0.10 M NaCl, or 0.50 M NaCl: where is AgCl less soluble?: 0.50 M NaCl. More common ion pushes the equilibrium further toward the solid.

Acid and solubility

The common-ion idea also runs in reverse. Anything that removes one of the ions pulls the equilibrium toward dissolving.

Magnesium hydroxide is a good example.

Mg(OH)2(s) ⇌ Mg2+(aq) + 2 OH−(aq)

In a basic solution there is already plenty of OH−, a common ion, so the solid is less soluble. In an acidic solution, H+ reacts with OH− to make water. That removes a product, so the equilibrium shifts to the right and more solid dissolves. This is how an antacid made of magnesium hydroxide dissolves in stomach acid.

The same happens for any solid whose negative ion is a base, such as a carbonate or a fluoride. Acid makes these solids more soluble. A solid like silver chloride is not affected, because chloride does not react with H+.

Key concepts

Common ion

An ion already in the solution that is also produced by the dissolving solid.

The effect

A common ion makes the solid less soluble. The equilibrium shifts toward the solid.

Calculating

Put the common ion in the initial row. At equilibrium its concentration is essentially unchanged.

Ksp is unchanged

Only temperature changes Ksp. The solubility changes, not the constant.

Acid

Acid raises the solubility of solids whose negative ion is a base, such as hydroxides and carbonates.

Practice

0 of 8 solved

Check each answer as you go. If you get stuck, open the hint first, then the text solution.

  1. Q1conceptOpen

    Why is AgCl less soluble in 0.10 M NaCl than in pure water?

    Question 1: choose one
    Hint

    Cl− is a product of the dissolving reaction.

    Text solution
    1. NaCl supplies Cl−, which is a product of AgCl(s) ⇌ Ag+ + Cl−.
    2. Adding a product shifts the equilibrium to the left.
    3. Less AgCl stays dissolved. Ksp itself is unchanged.
  2. Q2calculateOpen

    Ksp for AgCl is 1.6 × 10−10. What is its molar solubility in 0.050 M AgNO3, in M?

    Hint

    [Ag+] ≈ 0.050 M and [Cl−] = s.

    Text solution
    1. Ksp = [Ag+][Cl−] = (0.050)(s).
    2. s = (1.6 × 10−10) ÷ 0.050.
    3. s = 3.2 × 10−9 M.
  3. Q3calculateOpen

    Ksp for BaSO4 is 2.3 × 10−8. What is its molar solubility in 0.010 M Na2SO4, in M?

    Hint

    [SO42−] ≈ 0.010 M.

    Text solution
    1. Ksp = [Ba2+][SO42−] = (s)(0.010).
    2. s = (2.3 × 10−8) ÷ 0.010.
    3. s = 2.3 × 10−6 M.
  4. Q4calculate, squaredOpen

    Ksp for PbI2 is 1.4 × 10−8. What is its molar solubility in 0.10 M NaI, in M?

    Hint

    Ksp = [Pb2+][I−]2, with [I−] ≈ 0.10 M. Do not double the 0.10.

    Text solution
    1. Ksp = (s)(0.10)2.
    2. s = (1.4 × 10−8) ÷ 0.010.
    3. s = 1.4 × 10−6 M.
  5. Q5compareOpen

    In which of these is CaF2 least soluble?

    Question 5: choose one
    Hint

    Look for the most common ion.

    Text solution
    1. F− is a common ion for CaF2.
    2. The more F− already present, the further the equilibrium shifts toward the solid.
    3. 0.10 M NaF has the most F−.
  6. Q6ksp unchangedOpen

    Solid NaCl is dissolved in a saturated solution of AgCl at constant temperature. What happens to each quantity?

    (a) [Ag+]

    Question 6 part a: choose one

    (b) Ksp of AgCl

    Question 6 part b: choose one
    Hint

    Only temperature changes an equilibrium constant.

    Text solution
    1. The added Cl− shifts the equilibrium toward solid AgCl, so [Ag+] decreases.
    2. Ksp depends only on temperature, so it does not change.
  7. Q7hydroxideOpen

    Ksp for Mg(OH)2 is 8.9 × 10−12. What is its molar solubility in a solution where [OH−] = 0.010 M, in M?

    Hint

    Ksp = [Mg2+][OH−]2, with [OH−] ≈ 0.010 M.

    Text solution
    1. Ksp = (s)(0.010)2.
    2. s = (8.9 × 10−12) ÷ (1.0 × 10−4).
    3. s = 8.9 × 10−8 M.
  8. Q8acidOpen

    Why does Mg(OH)2 dissolve better in acid than in pure water?

    Question 8: choose one
    Hint

    What does H+ do to OH−?

    Text solution
    1. H+ reacts with OH− to make water.
    2. Removing a product shifts Mg(OH)2(s) ⇌ Mg2+ + 2 OH− to the right.
    3. More solid dissolves.

Sources

  • OpenStax Chemistry 15.1. Flowers, P.; Theopold, K.; Langley, R.; Robinson, W. R. Chemistry 2e, section 15.1, Precipitation and Dissolution. OpenStax, 2019. https://openstax.org/books/chemistry-2e/pages/15-1-precipitation-and-dissolution
  • OpenStax Chemistry, Appendix J. Flowers, P.; Theopold, K.; Langley, R.; Robinson, W. R. Chemistry 2e, Appendix J, Solubility Products. OpenStax, 2019. https://openstax.org/books/chemistry-2e/pages/j-solubility-products

How did it go?

Sections read: 0%. Practice: 0 answered.

How was this lesson?