Equilibrium constant, K
A ratio of equilibrium concentrations that has one value for a reaction at a given temperature.
Unit 7: Equilibrium and Solubility, lesson 2
Every equilibrium mixture obeys one simple rule. A certain ratio of concentrations always comes out to the same number, called the equilibrium constant. This lesson shows how to write that ratio for any reaction.
Three quick questions on ideas this lesson uses. They are not scored.
1.At equilibrium, which two things are equal?
Equilibrium means equal rates. The concentrations are constant, but usually not equal.
2.What is (0.20)3?
0.20 × 0.20 × 0.20 = 0.0080.
3.In 2 SO2 + O2 ⇌ 2 SO3, what is the coefficient of SO3?
The number in front of SO3 is 2.
Lesson 1 showed that a reaction reaches the same equilibrium mixture from either side. There is a number hiding in that mixture.
Take the reaction N2O4(g) ⇌ 2 NO2(g) again. Suppose three flasks are filled with different amounts and left to reach equilibrium at the same temperature. The concentrations at equilibrium are all different.
| Flask | [N2O4] (M) | [NO2] (M) | [NO2] ÷ [N2O4] | [NO2]2 ÷ [N2O4] |
|---|---|---|---|---|
| 1 | 0.500 | 0.316 | 0.63 | 0.20 |
| 2 | 0.200 | 0.200 | 1.0 | 0.20 |
| 3 | 0.050 | 0.100 | 2.0 | 0.20 |
Look at the last two columns. The simple ratio of the two concentrations changes from flask to flask. But if the concentration of NO2 is squared first, the ratio is 0.20 every time.
That number is the equilibrium constant, K. For a given reaction at a given temperature, it has one value. It does not matter what you start with, how much you use, or how big the flask is.[OpenStax Chemistry 13.2]
The pattern in the table works for every reaction. For a general reaction
a A + b B ⇌ c C + d D
the equilibrium constant is written like this.[OpenStax Chemistry 13.2]
Kc = ([C]c[D]d) ÷ ([A]a[B]b)
Three rules cover it.
The small c in the symbol means the expression is written with concentrations, in molarity.
In Unit 6 you could not get the exponents of a rate law from the balanced equation. Here you can. A rate law depends on the path the reaction takes. An equilibrium constant depends only on where the reaction ends up.
Step 1. Start with the balanced equation. N2(g) + 3 H2(g) ⇌ 2 NH3(g)
Step 2. Put the product on top, with its coefficient as the power. The top is [NH3]2.
Step 3. Put the reactants on the bottom, each with its coefficient as the power. The bottom is [N2][H2]3.
Step 4. Write the whole expression. Kc = [NH3]2 ÷ ([N2][H2]3)
Try it: writing Kc
If you know every concentration at equilibrium, finding K is one calculation. Suppose a mixture at equilibrium holds 0.10 M N2, 0.20 M H2 and 0.040 M NH3.
Kc = (0.040)2 ÷ ((0.10)(0.20)3) = 0.0016 ÷ 0.00080 = 2.0
K is reported as a plain number, with no units.
For gases, pressure is often easier to measure than concentration. The same expression can be written with partial pressures. The symbol is then Kp, and P with a subscript stands for the partial pressure of that gas.
Kp = (PNH3)2 ÷ (PN2 (PH2)3)
The rules are the same: products over reactants, coefficients as powers. Only the quantity changes. Kc and Kp for the same reaction usually have different values, so always say which one you mean. Lesson 3 shows how to change one into the other.
Some reactions have more than one phase. When limestone is heated in a closed container, it breaks down.[OpenStax Chemistry 13.2]
CaCO3(s) ⇌ CaO(s) + CO2(g)
A pure solid has a fixed concentration. A lump of calcium carbonate has the same number of moles in each liter of solid, whether the lump is big or small. The same is true of a pure liquid, such as water when it is the solvent. Because these concentrations cannot change, they are left out of the expression.
Kc = [CO2] and Kp = PCO2
So at a given temperature, the pressure of carbon dioxide over the solids is always the same, however much solid there is. Some solid of each kind must be present, but the amount does not matter.
Key idea
In a K expression, include gases and dissolved substances. Leave out pure solids and pure liquids.
Try it: what goes in the expression
For one reaction, only temperature changes the value of K. Adding more of a reactant, changing the volume, or adding a catalyst changes how the mixture gets to equilibrium, or what the mixture is. None of them changes K. Lesson 9 looks at each of these.
A ratio of equilibrium concentrations that has one value for a reaction at a given temperature.
Products over reactants, each concentration raised to its coefficient.
The same expression written with partial pressures of gases.
Pure solids and pure liquids do not appear in K.
For a given reaction, K changes only when the temperature changes.
0 of 9 solved
Check each answer as you go. If you get stuck, open the hint first, then the text solution.
Which is the correct expression for Kc for the reaction 2 NO(g) + O2(g) ⇌ 2 NO2(g)?
Products on top. Coefficients become powers.
For H2(g) + I2(g) ⇌ 2 HI(g), an equilibrium mixture holds 0.10 M H2, 0.10 M I2 and 0.70 M HI. What is Kc?
Kc = [HI]2 ÷ ([H2][I2]).
For N2O4(g) ⇌ 2 NO2(g), the partial pressures at equilibrium are 0.50 atm for N2O4 and 0.30 atm for NO2. What is Kp?
Kp = (P of NO2)2 ÷ (P of N2O4).
Which is the correct expression for Kc for the reaction CaCO3(s) ⇌ CaO(s) + CO2(g)?
Which substances are pure solids?
Which substances appear in the Kc expression for PbI2(s) ⇌ Pb2+(aq) + 2 I−(aq)?
Dissolved ions have concentrations that can change. A pure solid does not.
More N2 is added to a mixture of N2, H2 and NH3 at equilibrium, and the temperature is kept the same. After equilibrium is reached again, how does K compare with its old value?
What is the only thing that changes K for a given reaction?
For 2 SO2(g) + O2(g) ⇌ 2 SO3(g), an equilibrium mixture holds 0.20 M SO2, 0.10 M O2 and 0.40 M SO3. What is Kc?
Kc = [SO3]2 ÷ ([SO2]2[O2]).
Why can the exponents in a K expression be taken from the balanced equation, when the exponents in a rate law cannot?
A rate law depends on the mechanism.
For N2O4(g) ⇌ 2 NO2(g), Kc = 0.20 at a certain temperature. An equilibrium mixture holds 0.050 M N2O4. What is [NO2], in M?
Kc = [NO2]2 ÷ [N2O4]. Solve for [NO2].
Sections read: 0%. Practice: 0 answered.