AP ChemistryAll courses

Unit 7: Equilibrium and Solubility, lesson 7

ICE tables and equilibrium concentrations

An ICE table is a way of keeping track of every concentration from the start of a reaction to equilibrium. With one, you can find K from a measurement, or find the whole equilibrium mixture from K.

  • About 25 minutes
  • 5 sections
  • 9 practice questions
  • Narrated

After this lesson you can

  • Set up an ICE table from a balanced equation and starting amounts.
  • Write the change row using x and the coefficients.
  • Find K from starting concentrations and one equilibrium concentration.
  • Find equilibrium concentrations from K and starting concentrations.
  • Use the small-x shortcut when K is very small.

Warm-up check

Three quick questions on ideas this lesson uses. They are not scored.

  1. 1.In N2 + 3 H2 → 2 NH3, if 0.10 mol of N2 reacts, how many moles of NH3 form?

    See the answer

    2 mol NH3 form for each 1 mol N2: 0.10 × 2 = 0.20 mol.

  2. 2.Solve for x: 3 = x ÷ (0.80 − x).

    See the answer

    2.4 − 3x = x, so 4x = 2.4 and x = 0.60.

  3. 3.Which concentrations go into a K expression?

    Question 3: choose one
    See the answer

    K is defined with equilibrium concentrations only.

Three rows

ICE stands for the three rows of the table.[OpenStax Chemistry 13.4]

  • I, initial: the concentration of each substance at the start.
  • C, change: how much each concentration changes on the way to equilibrium.
  • E, equilibrium: the concentration of each at equilibrium. It is the initial row plus the change row.

The change row is where the chemistry is. The changes are not independent. They are tied together by the coefficients of the balanced equation, exactly as in stoichiometry. If the reaction runs forward, reactants go down and products go up.

Call the basic amount of change x. Then each substance changes by its coefficient times x. For N2 + 3 H2 ⇌ 2 NH3 running forward, the changes are −x for N2, −3x for H2 and +2x for NH3.

Key idea

In the change row, each entry is the coefficient times x. Reactants get a minus sign and products a plus sign when the reaction runs forward.

Finding K from a measurement

Hydrogen and iodine react to make hydrogen iodide: H2(g) + I2(g) ⇌ 2 HI(g). A flask starts with 1.00 M H2 and 1.00 M I2, and no HI. At equilibrium, [HI] is measured as 1.56 M. What is Kc?

RowH2I22 HI
Initial1.001.000
Change−x−x+2x
Equilibrium1.00 − x1.00 − x2x = 1.56
ICE table for H2 + I2 ⇌ 2 HI. Concentrations in M.

K from one equilibrium concentration

  1. Step 1. Fill in the initial row from the problem: 1.00, 1.00 and 0.

  2. Step 2. Write the change row with x and the coefficients: −x, −x and +2x.

  3. Step 3. Use the measurement to find x. At equilibrium [HI] = 2x = 1.56 M, so x = 0.78 M.

  4. Step 4. Finish the equilibrium row. [H2] = 1.00 − 0.78 = 0.22 M, and [I2] is the same.

  5. Step 5. Put the equilibrium row into the K expression. Kc = [HI]2 ÷ ([H2][I2]) = (1.56)2 ÷ ((0.22)(0.22)) = 50.

Only the equilibrium row ever goes into K. Putting initial concentrations into a K expression is one of the most common mistakes.

Finding the mixture from K

Now turn the problem around. For the same reaction at another temperature, Kc = 49.0. A flask starts with 0.500 M H2 and 0.500 M I2. What are the concentrations at equilibrium?

RowH2I22 HI
Initial0.5000.5000
Change−x−x+2x
Equilibrium0.500 − x0.500 − x2x
ICE table with x still unknown. Concentrations in M.

Put the equilibrium row into the K expression.

49.0 = (2x)2 ÷ (0.500 − x)2

Both the top and the bottom are perfect squares, so take the square root of both sides.

7.00 = 2x ÷ (0.500 − x),   so 3.50 − 7.00x = 2x,   and x = 0.389

Then [HI] = 2x = 0.778 M, and [H2] = [I2] = 0.500 − 0.389 = 0.111 M. Always check by putting the answers back into the expression: (0.778)2 ÷ (0.111)2 = 49. It matches.

Try it: set up the table

A flask starts with 0.80 M of A and nothing else. The reaction is A ⇌ 2 B.

Change row for A
Change row for B
Equilibrium row for A
K expression in terms of x
Show the reasoning
  • Change row for A: −x. A is a reactant with coefficient 1, and the reaction runs forward.
  • Change row for B: +2x. B is a product with coefficient 2.
  • Equilibrium row for A: 0.80 − x. Initial plus change: 0.80 + (−x).
  • K expression in terms of x: (2x)2 ÷ (0.80 − x). K = [B]2 ÷ [A], using the equilibrium row.

When K is very small

Often the equation for x is not a perfect square. When K is very small, there is a shortcut that avoids hard algebra.

At a certain temperature, Kc = 1.6 × 10−5 for 2 NOCl(g) ⇌ 2 NO(g) + Cl2(g). A flask starts with 0.50 M NOCl.

Row2 NOCl2 NOCl2
Initial0.5000
Change−2x+2x+x
Equilibrium0.50 − 2x2xx
ICE table for 2 NOCl ⇌ 2 NO + Cl2. Concentrations in M.

1.6 × 10−5 = (2x)2(x) ÷ (0.50 − 2x)2

K is tiny, so very little NOCl breaks down. That means 2x is very small next to 0.50, and 0.50 − 2x is almost exactly 0.50. Replace it.

1.6 × 10−5 ≈ 4x3 ÷ (0.50)2,   so x3 = 1.0 × 10−6,   and x = 0.010

So [Cl2] = 0.010 M and [NO] = 0.020 M. The amount of NOCl used, 0.020 M, really is small next to 0.50 M, so the shortcut was fair. Lesson 8 gives a test for when it is safe.

Key idea

When K is very small, the reactant concentration hardly changes. Treat “initial − x” as just “initial”.

Pressures work the same way

For gases, an ICE table can use partial pressures and Kp. The rows and the rules are the same. Just do not mix pressures and concentrations in one table.

Key concepts

ICE table

Initial, change and equilibrium rows for every substance in the K expression.

Change row

Coefficient times x. Minus for what is used up, plus for what is made.

K from data

Use one measured equilibrium value to find x, complete the E row, then calculate K.

Mixture from K

Put the E row into the K expression, solve for x, then check.

Small K

Drop x where it is subtracted from a much larger number.

Practice

0 of 9 solved

Check each answer as you go. If you get stuck, open the hint first, then the text solution.

  1. Q1change rowOpen

    For N2(g) + 3 H2(g) ⇌ 2 NH3(g) running forward, the change for N2 is −x. What are the changes for H2 and NH3?

    Question 1: choose one
    Hint

    Use the coefficients.

    Text solution
    1. Each change is the coefficient times x.
    2. H2 is a reactant with coefficient 3: −3x.
    3. NH3 is a product with coefficient 2: +2x.
  2. Q2find kOpen

    For N2O4(g) ⇌ 2 NO2(g), a flask starts with 0.100 M N2O4 and no NO2. At equilibrium, [NO2] = 0.040 M. What is Kc?

    RowN2O42 NO2
    Initial0.1000
    Change−x+2x
    Equilibrium0.100 − x0.040
    Hint

    2x = 0.040, so x = 0.020. Find [N2O4] at equilibrium first.

    Text solution
    1. 2x = 0.040 M, so x = 0.020 M.
    2. [N2O4] = 0.100 − 0.020 = 0.080 M.
    3. Kc = (0.040)2 ÷ 0.080 = 0.020.
  3. Q3find kOpen

    For PCl5(g) ⇌ PCl3(g) + Cl2(g), a flask starts with 0.50 M PCl5 only. At equilibrium, [Cl2] = 0.10 M. What is Kc?

    Hint

    x = 0.10 M. What are [PCl3] and [PCl5] at equilibrium?

    Text solution
    1. x = 0.10 M, so [PCl3] = 0.10 M and [PCl5] = 0.50 − 0.10 = 0.40 M.
    2. Kc = (0.10)(0.10) ÷ 0.40.
    3. Kc = 0.025.
  4. Q4find mixtureOpen

    For A ⇌ B, Kc = 3.0. A flask starts with 0.80 M A and no B. What is [B] at equilibrium, in M?

    Hint

    3.0 = x ÷ (0.80 − x).

    Text solution
    1. At equilibrium [A] = 0.80 − x and [B] = x.
    2. 3.0 = x ÷ (0.80 − x), so 2.4 = 4.0x.
    3. x = 0.60, so [B] = 0.60 M.
  5. Q5find mixture, perfect squareOpen

    For H2(g) + I2(g) ⇌ 2 HI(g), Kc = 64. A flask starts with 1.0 M H2 and 1.0 M I2. What is [HI] at equilibrium, in M?

    Hint

    Take the square root of both sides: 8.0 = 2x ÷ (1.0 − x).

    Text solution
    1. 64 = (2x)2 ÷ (1.0 − x)2. Take the square root: 8.0 = 2x ÷ (1.0 − x).
    2. 8.0 − 8.0x = 2x, so x = 0.80.
    3. [HI] = 2x = 1.6 M.
  6. Q6small kOpen

    For A ⇌ B + C, Kc = 4.0 × 10−8. A flask starts with 0.25 M A only. What is [B] at equilibrium, in M? Use the small-x shortcut.

    Hint

    K ≈ x2 ÷ 0.25.

    Text solution
    1. K = x2 ÷ (0.25 − x) ≈ x2 ÷ 0.25.
    2. x2 = (4.0 × 10−8)(0.25) = 1.0 × 10−8.
    3. x = 1.0 × 10−4 M, so [B] = 1.0 × 10−4 M.
  7. Q7pressureOpen

    For A(g) ⇌ 2 B(g), a container starts with A at 1.00 atm and no B. At equilibrium the total pressure is 1.20 atm. What is Kp?

    RowA2 B
    Initial (atm)1.000
    Change−x+2x
    Equilibrium1.00 − x2x
    Hint

    Total pressure = (1.00 − x) + 2x.

    Text solution
    1. 1.00 − x + 2x = 1.20, so x = 0.20 atm.
    2. At equilibrium the pressure of A is 0.80 atm and of B is 0.40 atm.
    3. Kp = (0.40)2 ÷ 0.80 = 0.20.
  8. Q8conceptOpen

    A student calculates K by putting the initial concentrations into the K expression. What is wrong?

    Question 8: choose one
    Hint

    Which row of the table describes the mixture at equilibrium?

    Text solution
    1. K describes the mixture at equilibrium.
    2. Only the E row goes into the expression.
    3. Initial concentrations would give Q at the start, not K.
  9. Q9small k, conceptOpen

    Why can x be dropped from (0.50 − x) when K is very small?

    Question 9: choose one
    Hint

    What does a very small K say about the mixture?

    Text solution
    1. A very small K means the mixture is almost all reactant.
    2. So the reactant concentration barely changes.
    3. 0.50 − x is very nearly 0.50.

Sources

  • OpenStax Chemistry 13.4. Flowers, P.; Theopold, K.; Langley, R.; Robinson, W. R. Chemistry 2e, section 13.4, Equilibrium Calculations. OpenStax, 2019. https://openstax.org/books/chemistry-2e/pages/13-4-equilibrium-calculations

How did it go?

Sections read: 0%. Practice: 0 answered.

How was this lesson?