AP ChemistryAll courses

Unit 7: Equilibrium and Solubility, lesson 2

Writing K expressions: Kc and Kp

Every equilibrium mixture obeys one simple rule. A certain ratio of concentrations always comes out to the same number, called the equilibrium constant. This lesson shows how to write that ratio for any reaction.

  • About 20 minutes
  • 6 sections
  • 9 practice questions
  • Narrated

After this lesson you can

  • Say what the equilibrium constant, K, is.
  • Write the expression for Kc from a balanced equation.
  • Write the expression for Kp for a reaction of gases.
  • Leave pure solids and pure liquids out of the expression.
  • Calculate K from concentrations measured at equilibrium.

Warm-up check

Three quick questions on ideas this lesson uses. They are not scored.

  1. 1.At equilibrium, which two things are equal?

    Question 1: choose one
    See the answer

    Equilibrium means equal rates. The concentrations are constant, but usually not equal.

  2. 2.What is (0.20)3?

    See the answer

    0.20 × 0.20 × 0.20 = 0.0080.

  3. 3.In 2 SO2 + O2 ⇌ 2 SO3, what is the coefficient of SO3?

    See the answer

    The number in front of SO3 is 2.

A ratio that never changes

Lesson 1 showed that a reaction reaches the same equilibrium mixture from either side. There is a number hiding in that mixture.

Take the reaction N2O4(g) ⇌ 2 NO2(g) again. Suppose three flasks are filled with different amounts and left to reach equilibrium at the same temperature. The concentrations at equilibrium are all different.

Flask[N2O4] (M)[NO2] (M)[NO2] ÷ [N2O4][NO2]2 ÷ [N2O4]
10.5000.3160.630.20
20.2000.2001.00.20
30.0500.1002.00.20
Three equilibrium mixtures at the same temperature (sample data).

Look at the last two columns. The simple ratio of the two concentrations changes from flask to flask. But if the concentration of NO2 is squared first, the ratio is 0.20 every time.

That number is the equilibrium constant, K. For a given reaction at a given temperature, it has one value. It does not matter what you start with, how much you use, or how big the flask is.[OpenStax Chemistry 13.2]

Writing Kc

The pattern in the table works for every reaction. For a general reaction

a A + b B ⇌ c C + d D

the equilibrium constant is written like this.[OpenStax Chemistry 13.2]

Kc = ([C]c[D]d) ÷ ([A]a[B]b)

Three rules cover it.

  • Products go on top, reactants on the bottom.
  • Each concentration is raised to the power of its coefficient in the balanced equation.
  • Use the concentrations at equilibrium, not the starting ones.

The small c in the symbol means the expression is written with concentrations, in molarity.

In Unit 6 you could not get the exponents of a rate law from the balanced equation. Here you can. A rate law depends on the path the reaction takes. An equilibrium constant depends only on where the reaction ends up.

Writing Kc for the reaction that makes ammonia

  1. Step 1. Start with the balanced equation. N2(g) + 3 H2(g) ⇌ 2 NH3(g)

  2. Step 2. Put the product on top, with its coefficient as the power. The top is [NH3]2.

  3. Step 3. Put the reactants on the bottom, each with its coefficient as the power. The bottom is [N2][H2]3.

  4. Step 4. Write the whole expression. Kc = [NH3]2 ÷ ([N2][H2]3)

Try it: writing Kc

Kc for 2 SO2(g) + O2(g) ⇌ 2 SO3(g)
Kc for H2(g) + I2(g) ⇌ 2 HI(g)
Show the reasoning
  • Kc for 2 SO2(g) + O2(g) ⇌ 2 SO3(g): [SO3]2 ÷ ([SO2]2[O2]). Products on top, reactants on the bottom, coefficients as powers.
  • Kc for H2(g) + I2(g) ⇌ 2 HI(g): [HI]2 ÷ ([H2][I2]). The coefficient 2 becomes a power, not a multiplier.

Calculating K from a mixture

If you know every concentration at equilibrium, finding K is one calculation. Suppose a mixture at equilibrium holds 0.10 M N2, 0.20 M H2 and 0.040 M NH3.

Kc = (0.040)2 ÷ ((0.10)(0.20)3) = 0.0016 ÷ 0.00080 = 2.0

K is reported as a plain number, with no units.

Kp for gases

For gases, pressure is often easier to measure than concentration. The same expression can be written with partial pressures. The symbol is then Kp, and P with a subscript stands for the partial pressure of that gas.

Kp = (PNH3)2 ÷ (PN2 (PH2)3)

The rules are the same: products over reactants, coefficients as powers. Only the quantity changes. Kc and Kp for the same reaction usually have different values, so always say which one you mean. Lesson 3 shows how to change one into the other.

Leave out solids and pure liquids

Some reactions have more than one phase. When limestone is heated in a closed container, it breaks down.[OpenStax Chemistry 13.2]

CaCO3(s) ⇌ CaO(s) + CO2(g)

A pure solid has a fixed concentration. A lump of calcium carbonate has the same number of moles in each liter of solid, whether the lump is big or small. The same is true of a pure liquid, such as water when it is the solvent. Because these concentrations cannot change, they are left out of the expression.

Kc = [CO2]    and    Kp = PCO2

So at a given temperature, the pressure of carbon dioxide over the solids is always the same, however much solid there is. Some solid of each kind must be present, but the amount does not matter.

Key idea

In a K expression, include gases and dissolved substances. Leave out pure solids and pure liquids.

Try it: what goes in the expression

Kc for 2 H2O(l) ⇌ 2 H2(g) + O2(g)
Kc for AgCl(s) ⇌ Ag+(aq) + Cl−(aq)
Kp for C(s) + CO2(g) ⇌ 2 CO(g)
Show the reasoning
  • Kc for 2 H2O(l) ⇌ 2 H2(g) + O2(g): [H2]2[O2]. Liquid water is a pure liquid, so it is left out.
  • Kc for AgCl(s) ⇌ Ag+(aq) + Cl−(aq): [Ag+][Cl−]. The solid is left out. Only the dissolved ions remain.
  • Kp for C(s) + CO2(g) ⇌ 2 CO(g): (P of CO)2 ÷ (P of CO2). Solid carbon is left out.

What changes K, and what does not

For one reaction, only temperature changes the value of K. Adding more of a reactant, changing the volume, or adding a catalyst changes how the mixture gets to equilibrium, or what the mixture is. None of them changes K. Lesson 9 looks at each of these.

Key concepts

Equilibrium constant, K

A ratio of equilibrium concentrations that has one value for a reaction at a given temperature.

Kc

Products over reactants, each concentration raised to its coefficient.

Kp

The same expression written with partial pressures of gases.

Left out

Pure solids and pure liquids do not appear in K.

Only temperature

For a given reaction, K changes only when the temperature changes.

Practice

0 of 9 solved

Check each answer as you go. If you get stuck, open the hint first, then the text solution.

  1. Q1kcOpen

    Which is the correct expression for Kc for the reaction 2 NO(g) + O2(g) ⇌ 2 NO2(g)?

    Question 1: choose one
    Hint

    Products on top. Coefficients become powers.

    Text solution
    1. The product, NO2, goes on top with the power 2.
    2. The reactants go on the bottom: [NO]2 and [O2].
    3. Kc = [NO2]2 ÷ ([NO]2[O2]).
  2. Q2kc, calculateOpen

    For H2(g) + I2(g) ⇌ 2 HI(g), an equilibrium mixture holds 0.10 M H2, 0.10 M I2 and 0.70 M HI. What is Kc?

    Hint

    Kc = [HI]2 ÷ ([H2][I2]).

    Text solution
    1. Kc = (0.70)2 ÷ ((0.10)(0.10)).
    2. Kc = 0.49 ÷ 0.010.
    3. Kc = 49.
  3. Q3kpOpen

    For N2O4(g) ⇌ 2 NO2(g), the partial pressures at equilibrium are 0.50 atm for N2O4 and 0.30 atm for NO2. What is Kp?

    Hint

    Kp = (P of NO2)2 ÷ (P of N2O4).

    Text solution
    1. Kp = (0.30)2 ÷ 0.50.
    2. Kp = 0.090 ÷ 0.50.
    3. Kp = 0.18.
  4. Q4heterogeneousOpen

    Which is the correct expression for Kc for the reaction CaCO3(s) ⇌ CaO(s) + CO2(g)?

    Question 4: choose one
    Hint

    Which substances are pure solids?

    Text solution
    1. CaCO3 and CaO are pure solids, so they are left out.
    2. Only the gas remains.
    3. Kc = [CO2].
  5. Q5heterogeneousOpen

    Which substances appear in the Kc expression for PbI2(s) ⇌ Pb2+(aq) + 2 I−(aq)?

    Question 5: choose one
    Hint

    Dissolved ions have concentrations that can change. A pure solid does not.

    Text solution
    1. PbI2 is a pure solid, so it is left out.
    2. The dissolved ions stay in.
    3. Kc = [Pb2+][I−]2.
  6. Q6conceptOpen

    More N2 is added to a mixture of N2, H2 and NH3 at equilibrium, and the temperature is kept the same. After equilibrium is reached again, how does K compare with its old value?

    Question 6: choose one
    Hint

    What is the only thing that changes K for a given reaction?

    Text solution
    1. K depends only on temperature.
    2. The concentrations change, but they settle so that the ratio is the same as before.
    3. K is the same.
  7. Q7kc, calculateOpen

    For 2 SO2(g) + O2(g) ⇌ 2 SO3(g), an equilibrium mixture holds 0.20 M SO2, 0.10 M O2 and 0.40 M SO3. What is Kc?

    Hint

    Kc = [SO3]2 ÷ ([SO2]2[O2]).

    Text solution
    1. Kc = (0.40)2 ÷ ((0.20)2(0.10)).
    2. Kc = 0.16 ÷ 0.0040.
    3. Kc = 40.
  8. Q8conceptOpen

    Why can the exponents in a K expression be taken from the balanced equation, when the exponents in a rate law cannot?

    Question 8: choose one
    Hint

    A rate law depends on the mechanism.

    Text solution
    1. A rate law depends on the steps of the mechanism, which the balanced equation does not show.
    2. An equilibrium constant describes only the final mixture.
    3. So its expression follows from the balanced equation alone.
  9. Q9kc, harderOpen

    For N2O4(g) ⇌ 2 NO2(g), Kc = 0.20 at a certain temperature. An equilibrium mixture holds 0.050 M N2O4. What is [NO2], in M?

    Hint

    Kc = [NO2]2 ÷ [N2O4]. Solve for [NO2].

    Text solution
    1. [NO2]2 = Kc × [N2O4] = 0.20 × 0.050 = 0.010.
    2. [NO2] = √0.010.
    3. [NO2] = 0.10 M.

Sources

  • OpenStax Chemistry 13.2. Flowers, P.; Theopold, K.; Langley, R.; Robinson, W. R. Chemistry 2e, section 13.2, Equilibrium Constants. OpenStax, 2019. https://openstax.org/books/chemistry-2e/pages/13-2-equilibrium-constants

How did it go?

Sections read: 0%. Practice: 0 answered.

How was this lesson?